업데이트 후 Windows 스토어 오류 0x8004E10E를 해결하는 방법
최근 윈도우 업데이트 이후로 마이크로소프트 스토어를 통해 앱을 업데이트하거나 설치하려고 하면 오류 코드 0x8004E10E가 표시되면서 작동이 멈추는 문제가 발생하나요? 정말 짜증나는 일이죠.재부팅을 해도 해결되지 않거나 문제 해결사를 실행해도 아무런 반응이 없는 경우도 있습니다.알고 보니, 특히 업데이트 후에 이러한 문제가 자주 발생하는데, 아마도 캐시나 시스템 파일이 손상되었기 때문일 것입니다.해결 방법이 항상 간단한 것은 아니지만, 아래 방법들을 통해 많은 사용자들이 문제를 해결했습니다.간단한 재설정만으로 해결되는 경우도 있고, 좀 더 심층적인 해결이 필요한 경우도 있습니다.
캐시를 정리하거나, 시스템 파일을 복구하거나, Microsoft Store 앱을 초기화하면 일반적으로 골머리 앓지 않고 앱 업데이트를 다시 시작할 수 있습니다.이러한 방법들은 그다지 복잡하지 않으며, 몇 가지 단계를 시도해 보기만 하면 됩니다.목표는 무엇일까요? Windows를 재설치하지 않고도 Microsoft Store를 원활하게 다시 사용하는 것입니다.솔직히 말해서, 누구도 Windows 재설치를 좋아하지 않으니까요.
Windows 스토어에서 0x8004E10E 오류를 해결하는 방법
해결 방법 1. Windows 스토어 앱 문제 해결사 실행
문제 해결 도구는 스토어가 제대로 작동하지 않는 명백한 문제를 해결하는 데 도움이 될 수 있습니다.마치 빠른 진단 검사처럼 자동으로 문제를 해결해 줍니다.업데이트 후 오류가 발생하면 한번 시도해 볼 만합니다.
- Windows 검색창에 “문제 해결”을 입력 하고 Enter 키를 누르세요.
- 오른쪽의 ‘추가 문제 해결 방법’ 을 클릭하세요.
- 아래로 스크롤하여 Windows 스토어 앱을 찾아보세요.
- 클릭한 다음 ‘문제 해결사 실행’을 선택하세요.
- 표시되는 권장 사항(예: 캐시 재설정, 권한 수정 등)을 적용한 다음 PC를 다시 시작하십시오.
- 모든 것이 정상이라고 표시되지만 오류가 계속 발생하면 다음 방법으로 넘어가십시오.
이 기능이 어떻게 도움이 될까요? 이 기능은 데이터 손상이나 권한 문제처럼 업데이트 오류의 원인이 될 수 있는 일반적인 문제를 확인합니다.어떤 경우에는 이 기능으로 문제가 바로 해결되기도 합니다.왜 그런지는 정확히 모르겠지만, 윈도우가 약간의 도움을 받으면 스스로 문제를 해결하는 경향이 있기 때문인 것 같습니다.
해결 방법 2. Windows와 Microsoft Store가 완전히 업데이트되었는지 확인하세요.
네, 많은 버그는 오래된 시스템 파일이나 스토어 클라이언트 자체에서 발생합니다.모든 것을 최신 상태로 유지하는 것은 PC의 안정성을 새롭게 유지하는 것과 같습니다.보류 중인 업데이트가 있다면, 특히 대규모 Windows 패치 이후에 앱 다운로드에 문제가 발생하는 원인이 될 수 있습니다.
- Windows 검색창에 “업데이트”를 입력 하고 Enter 키를 누르세요.
- 오른쪽의 ‘업데이트 확인’을 클릭하세요.
- 선택적 업데이트를 포함하여 사용 가능한 모든 업데이트를 설치하십시오(선택적 업데이트는 특정 버그를 수정하는 경우가 있습니다).
- 마이크로소프트 스토어를 여세요
- 오른쪽 상단의 점 세 개( 더 보기 )를 클릭한 다음 다운로드 및 업데이트를 선택하세요.
- ‘모두 업데이트’를 눌러 보류 중인 스토어 업데이트를 다운로드하세요.
- 모든 설정이 최신 상태로 제대로 적용되었는지 확인하려면 PC를 재부팅하십시오.
왜 굳이 업데이트를 해야 할까요? 오래된 부품은 알 수 없는 오류를 일으킬 수 있기 때문입니다.업데이트는 호환성 문제를 해결해 주는데, 특히 운영체제 자체에 패치가 적용된 후에는 더욱 효과적입니다.때로는 간단한 업데이트만으로 오류가 사라지기도 합니다.어떤 PC에서는 효과가 있었고, 어떤 PC에서는 그렇지 않았지만, 시도해 볼 가치는 충분합니다.
해결 방법 3. SFC 및 DISM을 사용하여 시스템 파일 복구
이건 흔히 있는 일이죠.시스템 파일 손상이 앱 스토어 오류의 원인인 경우가 많거든요.명령어를 실행하면 sfc /scannow손상된 파일을 찾아서 복구할 수 있습니다.그래도 문제가 해결되지 않으면 DISM 명령어를 사용해서 Windows 파일을 정상 상태로 복원해 볼 수도 있습니다.솔직히 말하면, 저는 그냥 두 명령어를 모두 실행하기도 합니다.안 할 이유가 없잖아요?
- 명령 프롬프트를 관리자 권한으로 실행하려면 검색창에 cmd를 입력하고 마우스 오른쪽 버튼을 클릭한 다음 “관리자 권한으로 실행”을 선택하세요.
- 이 명령어를 붙여넣고 Enter 키를 누르세요 :
sfc /scannow - 완료될 때까지 기다리세요(몇 분 정도 소요될 수 있습니다).파일 복구가 완료되면 PC를 재시작하고 Microsoft Store가 제대로 작동하는지 확인하세요.
- 오류가 발생하면 다음 명령어를 하나씩 실행하고 각 명령어 실행 후 Enter 키를 누르십시오.DISM /Online /Cleanup-Image /CheckHealth DISM /Online /Cleanup-Image /ScanHealth DISM /Online /Cleanup-Image /RestoreHealth
- 완료되면 실행하세요.
sfc /scannow again. After all that, reboot and hope for the best.
This typically helps fix corrupted system data that might be interfering with Store operations. On some machines, it feels a bit like fixing a leaky pipe—kind of messy but effective.
Fix 4. Reset the Microsoft Store Cache with wsreset
This is surprisingly simple but often overlooked. Resetting the Store cache clears out stuck data and forces it to re-sync. If downloads or updates are stuck, this might be all that’s needed.
- Press Win + R
- Type in WSReset.exe and hit Enter or click OK
- A black command prompt window will pop up—just wait it out. Do not close it manually.
- Once it disappears, the Store should open automatically, hopefully at least showing you a fresh start.
This simple reset often solves the 0x8004E10E stuck cache problem. Several times, it fixed things on the first try—and, honestly, it’s the easiest move.
Fix 5. Fully Reset the Microsoft Store
If cache clearing isn’t enough, a full reset via the Apps settings might do the trick. It’s kind of like reinstalling the Store, without actually uninstalling it.
- Right-click on Start and select Apps and Features
- Scroll down to find Microsoft Store
- Click it, then choose Advanced options
- Click on Terminate (to stop it if running) and then Reset
- Once done, restart your PC and reopen the Store
This often clears deeper issues, especially if the app’s data got corrupted over time or after an update. You might lose some local settings, but usually, it’s worth a shot.
Fix 6. Re-register the Store App Using PowerShell
This is kinda advanced but works like magic. It essentially restores the Store’s registration with Windows, re-enabling it from scratch.
- Right-click Start and pick PowerShell (Admin)
- Hit Yes if prompted by UAC
- Copy and paste this command:
Get-AppXPackage *Microsoft. WindowsStore* | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_. InstallLocation)\\AppXManifest.xml”} - Press Enter and wait for the process to finish
- Close PowerShell and check if the Store now works properly
This method often fixes stubborn errors caused by registry or package corruption. If things still don’t work, sometimes a repair reinstall of Windows becomes the last resort.
Fix 7. Reset Your PC – Last Resort
And if all else fails, the nuclear option: resetting your PC. This often clears out whatever residual corruption is wrecking the Store, but as always, back up important files first. Disconnect external devices, just in case something interferes, and pick “Keep my files” if possible.
- Open Settings via Start
- Navigate to Updates & Security
- Click on Recovery
- Under Reset this PC, hit Get started
- Select Keep my files and choose Cloud Download if available
- Follow on-screen instructions, and your PC will restart with a fresh setup of Windows — hopefully, the Store is back to normal afterward.
Sometimes, fixing these errors just takes a few tricks. And while it can feel frustrating hitting dead ends, trying these steps in sequence usually digs out the root cause and sorts out the update issues. Because of course, Windows has to make things more complicated than they should be—thanks, system bugs!