Das Problem mit der Fehlermeldung „Accelerometerst.exe – Anwendungsfehler“ auf einem Windows-PC kann lästig sein. Sie erscheint manchmal willkürlich beim Starten oder Herunterfahren des Laptops, insbesondere bei Geräten mit integrierten Sensoren wie einigen Surface-Modellen oder Tablets. Die Ursache? Die Datei Accelerometerst.exe scheint Konflikte zu verursachen oder beschädigt zu sein – wahrscheinlich aufgrund eines veralteten oder inkompatiblen Treibers oder eines fehlerhaften Updates. Das ist frustrierend, da es zu Systemabstürzen, seltsamen Fehlern oder einfach zu Problemen bei der Arbeit führen kann, wenn man die Beschleunigungssensorfunktionen für bestimmte Apps oder Orientierungsdienste benötigt.
Zum Glück ist die Behebung des Problems kein Albtraum. Möglicherweise müssen Sie Treiber aktualisieren, Dateien reparieren oder sogar auf einen früheren Systemzustand zurücksetzen. Ziel ist es, diesen lästigen Fehler zu beseitigen, damit Ihr Gerät reibungslos läuft und die Sensoren wie gewünscht funktionieren. Im Folgenden finden Sie einige getestete Methoden, die bei verschiedenen Konfigurationen geholfen haben, diesen Fehler zu beheben. Sie sind zwar nicht perfekt, aber einen Versuch wert – vielleicht finden Sie eine, die das Problem löst, ohne alles zu beschädigen.
Methode 1. Beschädigte oder fehlerhafte Systemdateien reparieren
Das ist eine Art klassische Lösung. Beschädigte Systemdateien können Probleme verursachen, und Windows bietet dafür integrierte Tools. Ausführensfc /scannow attempts to locate and fix corrupt system files, including drivers or DLLs the accelerometer or related components might depend on.
Open Command Prompt as administrator
- Click on the Start menu, type cmd.
- Right-click on Command Prompt and select Run as administrator. If UAC prompts, accept it.
Run the System File Checker
- Type
sfc /scannowand hit Enter.
It might take a few minutes, so be patient. If errors are found, Windows will attempt to fix them on the spot. Watch out: sometimes it reports that it couldn’t fix everything, and then you’ll need to move onto DISM commands.
Use DISM to repair the image if SFC finds errors
- Copy and paste these commands one by one, pressing Enter after each:
DISM /Online /Cleanup-Image /CheckHealthDISM /Online /Cleanup-Image /ScanHealthDISM /Online /Cleanup-Image /RestoreHealth
This more thorough scan/repair helps fix the underlying issues SFC can’t handle alone. On some setups, this needs a reboot, and sometimes a second run of sfc /scannow can help. Might be weird, but it’s a good first try.
Method 2. Uninstall HP 3D DriveGuard or Similar Software
This is a more specific fix if you’re using certain laptops like HP ones with 3D DriveGuard or other sensor-related utilities. Sometimes, these programs clash with Windows’ own accelerometer features—especially after Windows updates or driver updates. So, removing or reinstalling them can clear out the weird conflicts.
Uninstall via Control Panel
- Press Windows key and type control, then hit Enter.
- Click on Control Panel → Programs → Uninstall a program.
- Find HP 3D DriveGuard or any other suspect sensor software.
- Right-click on it, choose Uninstall, and follow the prompts.
Reinstall the latest drivers/software
- After uninstalling, visit the specific device manufacturer website, like HP’s support page, or the hardware vendor’s site.
- Download the latest driver or sensor utility version compatible with your OS—because of course, Windows has to keep making it hard.
- Install and restart—sometimes the error just goes away after this.
Method 3. Register or Re-register VCRUNTIME140.dll
This DLL file is part of Visual C++ libraries that many programs depend on. Errors with accelerometer or sensor apps can sometimes be linked to DLL misregisters. So, re-registering this DLL might help clear those errors.
Unregister the DLL first
- Open Run with Windows key + R.
- Type
regsvr32 /u c:\Windows\System32\vcruntime140.dlland hit OK.
This step unregisters the DLL, which sometimes can fix misconfigurations or corruption.
Register the DLL again
- Open Run again (Windows key + R) and type
regsvr32 c:\Windows\System32\vcruntime140.dll. - Hit Enter, then wait—if you see a success message, awesome.
On some machines, this step alone can fix minor DLL issues that interfere with accelerometer software. Plus, it’s quick and painless.
Method 4. Download and Install Visual C++ Redistributable
Could be that your system is missing or has a corrupt Visual C++ runtime. That package is needed for a lot of apps, especially drivers for sensors. Jump over to the official Microsoft download page here.
- Select the right version: vc_redist.x64.exe or x86.exe depending on your system architecture.
- Download and run the installer—just double-click and follow prompts.
- Finish by restarting your PC; sometimes, Windows has to redo its sensor configs or driver loads, and this helps.
Method 5. Repair the Visual C++ Redistributable
If installing didn't help, repairing might do the trick—kind of like giving it a little tune-up. Head to Control Panel → Programs and Features (appwiz.cpl) and find the appropriate V C++ package.
- Right-click on the relevant Microsoft Visual C++ Redistributable, then choose Uninstall.
- Follow the prompts—and after it’s gone, go back to the same list
- Right-click again and pick Repair.
- Let it run, then reboot. Fingers crossed, this clears up DLL errors that might cause the accelerometer error.
Method 6. Roll Back Using System Restore
Finally, if all else fails, going back to a point before the errors started is a solid option. Sometimes, an update or new driver causes this mess and simply rolling back can bring relief.
- Hit the Start menu, type restore, and click Create a restore point.
- Choose System Restore and follow the wizard steps. Pick a restore point from before the error appeared—if you can figure out when that was.
- Confirm, then let Windows do its thing. Expect a restart, and hopefully, the error is gone.
All in all, fixing "Accelerometerst.exe - Application Error" feels a bit like troubleshooting a stubborn tech puzzle. Usually, one of these methods gets the job done, though sometimes it takes more patience than expected. Remember, hardware or driver conflicts tend to be the core problem; so updating or installing the right software often solves the puzzle.
Summary
- Run sfc /scannow and DISM commands to fix corrupt system files
- Uninstall/reinstall sensor-related software like HP 3D DriveGuard
- Re-register DLL files such as vcruntime140.dll
- Download and update Microsoft Visual C++ Redistributable packages
- Repair those redistributables if needed
- Use System Restore if nothing else works
Wrap-up
Hopefully, one of these approaches helps rid your system of that nagging error. It’s a bit of trial and error, but fixing sensor or driver conflicts can actually get your device back to normal. Sometimes, Windows just needs a little nudge—or a fresh driver—to play nicely again. Fingers crossed this helps save some headaches—and if it gets a step closer to working smoothly, then it’s worth the effort.